- Climate Control Coatings
- Leather Coatings
- High Temperature Paints
- Road Marking Paints
- Industrial Adhesives And Putties
- Ceramic Putty
- Others Product From IIEX
- Construction Chemical And Additives
- Weather Proof SRI Tiles
- Cement Primer
- Unique Enamel Paints
- Unique Wood Coating Water Based
- Unique Water Resistant Coatings
- Unique Corrosion Resistant Coating
- Paints (Emulsion)
- Wall Putty
- Industrial Paints
- Inlays Filling Finish
|Home||» Products||» Road Marking Paints||» Road Marking Paints (Cold)|
Road Marking Paints (Cold)
Thermoplastic road marking coating (cold)
It is composed of thermoplastic resins with plasticizer provides excellent adhesion with the surface. It gives a smooth and uniform finishes that resists water, sunlight, and dust. It offers excellent weather resistance and withstands rugged conditions. It has excellent flow and levying properties.
Colours available: White, black and golden yellow
Thermoplastic road marking coating (Hot)
It is composed of hydrocarbon resins, plasticizer, filler pigment, and silica sand. Specially formulated to work with concrete and bitumen surface and have excellent flow and durability.
It provides excellent adhesion / bonding with concrete and bitumen substrates possess excellent durability and weathering resistance. It provides uniform finish that resist water and sunlight to penetrate into the surface. Higher the film thickness better will be the durability.
THERMOPLASTIC ROAD MARKING PAINT (Cold)
White , Black And Golden Yellow
Smooth & Uniform
80 To 120 Seconds By Ford Cup No B 4 At 30 Degree C
1.30 To 1.40
Surface Drying : 5 To 10 Minutes.
| || |
Hard Drying : 30 To 45 Minutes
Not Below 25 Degree
12 To 15 Sq.Mtr Depending Upon The Surface Conditions.
Dry Film Thickness
50 To 100 Microns
Recommended Thinner For Use
Special Thinner For Cold Thermolastic Road Marking Paint.
20 Ltrs M.S. Drum
Method Of Application
By Brush Or Spray After Thinningt To Desired Consistency.
6 Months From The Date Of Manufacturing.
This data are typicals of current production but are not necessarily specification This information given and recommendation made herein are based on our experience and are our believed to be accurate. no guarantee as to responsibility for their accuracy can be given or accepted, however and no statement herein is to be treated as re-presentration or warranty. in every case we urge and recommended that purchasers before using any product make their own tests to their own satisfaction, its suitability for their particular purpose under their own operating conditions.
Road Marking Paint- Cold
Unique Coats, road marking paint cold is for interior and exterior use, marking areas such as car parks and demarcation zones on concrete and asphalt surfaces.
KEY BENEFITS :
- Excellent Scuff Resistance
- High-Build Finish
- Withstands Repeated Washing
- Typical Use Suitable for interior and exterior use.
- Pack Size 20 L
- Colour Range White & Yellow.
- Heat Resistance: Not recommended for use on heated surfaces.
- Water Resistance: Good.
- Composition (nominal) Pigment: Light fast Pigments. Binder: Vinyl Acrylate Copolymer.
Systems Information Stir Thoroughly Before Use.
After surface preparation, the normal recommendation is to apply 1 or 2 coats of cold marking paint. Do not use in cold, damp conditions.
Application Method :
- Brush or roller only. Do not spray.
- Practical Coverage
- A guide to the practical coverage which can be achieved under normal conditions is up to 10m² per litre.