Cookie Img
Send Inquiry    Call Me Free Offline Send SMS
Home » Products » Industrial Adhesives And Putties » Steel Putty

Steel Putty

Steel Putty
Steel Putty
Product Code : Ind-003
Product Description

Taking the advantage of our sophisticated infrastructure facilities, we are engaged in manufacturing and offering Steel Putty. These puttys are extensively used in machine bed, tank, flange face, leveling, compressor, hydraulic ram, casing and pipe for general maintenance and repair. Formulated using optimum grade compounds and modern technology, our Steel Putty is appreciated for its attributes like fast setting, easy application and high effectiveness.  We not just only ensure the quality of our putty but also offer this at an affordable price.

Product Description

A steel filled epoxy putty for general maintenance and repairs. For filling, rebuilding and bonding metal surfaces.

Features and benefits :

  • Setup in 5 minutes, functional cure in 1 hour
  • Applies easily. No special tools required
  • Bonds to steel and many other metals, as well as concrete
  • Machinable (see back page)
  • Makes repairs that are non-rusting

Recommended Applications :

Repair of worn or fatigued metals

Patching of castings Making jigs and fixtures  Rebuilding pump and valve bodies  Restoring bearing journals and races Typical Physical Properties: Cured 7 days @ 24oC Colour Grey Mixing Ratio (resin to hardener)Volume 10:1Mixed Viscosity Putty Work Time at 30oC 5 minutes% Solids by Volume100Cured Density 1.84 gm/cc Cure Shrinkage ASTM D25660.009 cm/cm Cured Hardness Shore D ASTM D224085DTemperature Resistance:Dry 110oC Coverage1084cm2/kg @ 5mm

Directions for Use:

Proper surface preparation is essential to the success of any epoxy application. In all cases the surface should be clean, dry, free from oils, and rough.

  • Remove all oils, dirt and grease by means of a strong cleaner/degreaser like C.T.C./ T.C.E./M.E.K. etc.
  • Roughen the surface by grit blasting (8-40 mesh grit) or grinding. A 75-125 micron profile is desired for most applications.
  • All abrasive preparation should be followed by another cleaning to remove any remnants from that process.
  • Ideal application temperature is 13oC-32oC. Under cold conditions, heating the repair area to 38oC - 43oC is recommended.
  • Add hardener to resin and mix thoroughly with a putty knife until a uniform, streak-free consistency is obtained (about 2 minutes).
  • Spread mixed material over the repair area and work firmly into the substrate to ensure maximum surface contact.
  • To bridge large gaps or holes, use fibreglass tape, expanded metal or mechanical fasteners

Cure:

Working time is 5 minutes @ 30oC

  • Functional (75%) cure is achieved in 1 hour @ 30°C Machining
  • Allow material to cure for at least 1 hour before machining
  • Lathe speed 48 m/minute
  • Cut: dry
  • Tools: Carbide top rake 6 (+/- 2o) - Side/front 8 (+/- 2o)
  • Feed rate (rough): Travel speed 0.50 mm Rough cut 0.50 mm - 1.5 mm/rev
  • Feed rate (finishing): Travel speed 0.25 mm Finish cut 0.25 mm/rev
  • Polishing: use 400 to 650 emery paper wet. Material should polish to a 25-50 micron finish.

Ind Industrial Exporters

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



  • Ind Industrial Exporters
    AN ISO 9001:2008 CERTIFIED COMPANY Delhi,India
  • 53, A4C, Janakpuri, New Delhi - 110058, India
  • Mrs. Shraddha Avasthi (Marketing Director)
  • Works Address: 224-225, Pushkar Ind. Estate, Pop Macons Factory, Phase-1, G.I.D.C. Vatva, Ahmedabad, 382445

Product Showcase
  • Send Inquiry  
  •    Call Me Free Offline
  • Send SMS
IND INDUSTRIAL EXPORTS All Rights Reserved.